Everything about Cable Modem totally explained
A
cable modem is a type of
modem that provides access to a data signal sent over the
cable television infrastructure. Cable modems are primarily used to deliver
broadband Internet access in the form of
cable internet, taking advantage of unused
bandwidth on a cable television network. They are commonly found in
Australia,
New Zealand,
Canada,
Europe, the
United Kingdom,
Costa Rica, and the
United States. In USA alone there were 22.5 million cable modem users during the first quarter of 2005, up from 17.4 million in the first quarter of
2004.
In network topology, a cable modem is a
network bridge that conforms to
IEEE 802.1D for
Ethernet networking (with some modifications). The cable modem bridges Ethernet frames between a customer
LAN and the coax cable network.
With respect to the
OSI model, a cable modem is a
data link layer (or layer 2) forwarder, rather than simply a
modem.
A cable modem does support functionalities at other layers. In
physical layer (or layer 1), the cable modem supports the
Ethernet PHY on its LAN
interface, and a
DOCSIS defined cable-specific PHY on its
HFC cable interface. It is to this cable-specific PHY that the name
cable modem refers. In the
network layer (or layer 3), the cable modem is a
IP host in that it has its own
IP address used by the network operator to manage and troubleshoot the device. In the
transport layer (or layer 4) the cable modem supports
UDP in association with its own IP address, and it supports filtering based on
TCP and UDP port numbers to, for example, block forwarding of
NetBIOS traffic out of the customer's LAN. In the
application layer (layer 5 or layer 7), the cable modem supports certain protocols that are used for management and maintenance, notably
DHCP,
SNMP, and
TFTP.
Some cable modem devices may incorporate a
router along with the cable modem functionality, to provide the LAN with its own
IP network addressing. From a data forwarding and network topology perspective, this router functionality is typically kept distinct from the cable modem functionality (at least logically) even though the two may share a single enclosure and appear as one unit. So, the cable modem function will have its own
IP address and
MAC address as will the router.
History
Hybrid Networks
Hybrid Networks developed, demonstrated and patented the first high speed, asymmetrical cable modem systems in 1990. A key Hybrid Networks insight was that highly asymmetrical communications would be sufficient to satisfy consumers connected remotely to an otherwise completely symmetric high speed data communications network. This was important because it was very expensive to provide high speed in the upstream direction, while the CATV systems already had substantial broadband capacity in the downstream direction. Also key was that it saw that the upstream and downstream communications could be on the same or different communications media using different protocols working in each direction to establish a closed loop communications system. The speeds and protocols used in each direction would be very different. The earliest systems used the public switched telephone network (PSTN) for the return path since very few cable systems were bi-directional. Later systems used cable for the upstream as well as the downstream path.
There were extreme skepticism to this approach initially. In fact, many technical people doubted that it could work at all. Hybrid's system architecture is the way most cable modem systems operate today.
LANcity
LANcity was an early pioneer in cable modems, developing a proprietary system that saw fairly wide deployment in the US. LANcity was sold to
Bay Networks which was then acquired by
Nortel, which eventually spun the cable modem business off as
ARRIS.
ARRIS continues to make cable modems and
CMTS equipment compliant with the
DOCSIS standard.
Com21
Com21 was another early pioneer in cable modems, and quite successful until proprietary systems became obsolete when
DOCSIS became the widely accepted standard. The Com21 system used a
ComController as central bridge in CATV network head-ends, the ComPort cable modem in various models and the NMAPS management system using
HP OpenView as platform. Later they also introduced a return path multiplexer to overcome noise problems when combining return path signals from multiple areas. The proprietary protocol was based on the
ATM protocol. The central ComController switch was a modular system offering one downstream channel (transmitter) and one management module. The remaining slots could be used for upstream receivers (2 per card), dual ethernet 10BaseT and later also Fastethernet and ATM interfaces. The
ATM interface became the most popular as it supported the increasing bandwidth demands and also supported
VLAN's.
Com21 developed a DOCSIS modem, but didn't survive and filed bankruptcy in 2003.
CDLP
CDLP was a proprietary system that was made by
Motorola. CDLP
CPE was capable of both
PSTN (telephone network) and
RF (cable network) return paths. The PSTN return path cable modem service was considered 'one way cable' and had many of the same drawbacks as
satellite Internet service, and as a result it quickly gave way to two way cable. Cable modems that used the RF cable network for the return path were considered 'two way cable', and were better able to compete with
DSL which was bidirectional. The standard is more or less defunct now with new providers using, and existing providers having changed over to, the
DOCSIS standard.
The Motorola CDLP Proprietary CyberSURFR
is an example of a modem that was built to the CDLP standard, capable of a peak 10
Mbit/s downstream and 1.532 Mbit/s upstream. (CDLP supported a maximum downstream bandwidth of 30 Mbit/s which could be reached by using several modems.)
The
Australian ISP
BigPond employed this system when it started cable modem trials in 1996. For a number of years cable Internet access was only available to
Sydney,
Melbourne and
Brisbane via CDLP. This network ran parallel to the newer
DOCSIS system for a number of years. In
2004 the CDLP network was switched off and now is exclusively
DOCSIS.
IEEE 802.14
In the mid-1990s the
IEEE 802 committee formed a subcommittee (802.14) to develop a standard for cable modem systems. While significant progress was made, the group was disbanded when North American
MSOs instead backed the fledgling
DOCSIS specification.
In the late 1990s, a consortium of US cable operators, known as "MCNS" formed to quickly develop an open and interoperable cable modem specification. The group essentially combined technologies from the two dominant proprietary systems at the time, taking the
physical layer from the
Motorola CDLP system and the
MAC layer from the LANcity system. When the initial specification had been drafted, the MCNS consortium handed over control of it to
CableLabs. CableLabs took on maintenance of the specification, promoted it in various standards organizations (notably
SCTE and
ITU), developed a certification testing program for cable modem equipment, and has since drafted multiple extensions to the original specification. Virtually all cable modems operating in the field today are compliant with one version or another of
DOCSIS. Because of the differences in the European
PAL and USA's
NTSC systems two main versions of DOCSIS exist:
DOCSIS and
EuroDOCSIS. The main differences are found in the width of RF-channels: 6 Mhz for the USA and 8 Mhz for Europe.
Japan uses their own version of
DOCSIS. Nearly all current cablemodem systems use a version of this standard.
Cable modems and VoIP
With the advent of
Voice over IP telephony, cable modems can also be used to provide telephone service. Many people who have cable modems have opted to eliminate their
Plain Old Telephone Service (POTS). Because most telephone companies don't offer
naked DSL (
DSL service without a
POTS line),
VoIP use is higher amongst cable modem users.
A cable modem subscriber can make use of
VoIP telephony by subscribing to a third party service (for example
Vonage or
Skype). As an alternative, many cable operators offer a VoIP service based on
PacketCable. PacketCable allows
MSOs to offer both High Speed Internet and VoIP through a single piece of customer premise equipment, known as an Embedded Multimedia Terminal Adapter (
EMTA or
E-MTA). An EMTA is basically a cable modem and a VoIP adapter (known as a Multimedia Terminal Adapter) bundled into a single device. PacketCable service has a significant technical advantage over third-party providers in that voice packets are given guaranteed
Quality of Service across their entire path so that call quality can be assured.
To attain a higher quality
VoIP telephone line, cable modem users often will take advantage of the 2
ip addresses that many
ISP's provide. This type of setup allows the pc's to access the internet under one
ip address while the voip gateway has its own ip address. This is advantageous to many
voip users as it creates a network where their pc network activity doesn't affect their call quality. To achieve this setup, a switch/hub is placed downline of the modem. Doing so will assign 2
ip addresses (one to the computer network for example router and one to the voice gateway).
Further Information
Get more info on 'Cable Modem'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://cable_modem.totallyexplained.com">Cable modem Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
